Water Jet Cutting Equipment And Everything You Need To Know About It

The 5 most renowned benefits of water jet cutting systems

There are many benefits that you can get from a water jet cutting equipment and it is important that you know all about it before you start using one or even if you are already in the verge of using the waterjet technology. In order for you to make a good decision regarding the waterjet technology for your business, it would be wise to read this article so that you can learn more about the benefits that it is able to provide.

To begin with, there are two kinds of waterjet cutting methods that you should know of which is the abrasive and pure waterjet cutting. If you are going to use water stream alone for cutting soft materials such as paper or foam, this is the method known as pure waterjet cutting. You need to include a granular abrasive in the water stream in order for the abrasive waterjet cutting method to work. When you need to cut ceramics, metal, or any hard materials, the method that you should use is the abrasive waterjet cutting because the granular abrasive will add power to the cutting stream.

Know more about the waterjet technology with these five benefits that are being outlined for you:

1. There is no limitation when it comes to the materials
Almost all kinds of materials are being cut by the waterjet technology including rubber, rock or stone, ceramics, plastics, composites, and metals. A 200mm thickness is achievable as long as you are going to add a granular abrasive to your waterjet cutting machine to make it perform better.

2. You do not have to worry about the HAZ or the heat affected zone
The HAZ or the heat affected zone should be less of your worries since the water jet cutting equipment is made up of a cold cutting method. Clean cuts are being given off by cold cutting as well as the increase in the safety of the operator by making sure all risks of burns are eliminated.

3. There is no distortion of materials
There is no need for you to worry that the material will be deformed especially if it is a hard one such as metal, because the cold cutting method makes sure that any heat exposure will be taken care of. A burr-free cut and a smooth cut is the after effect of this method.

4. You don’t have to do any additional finishing process
The products will be provided with the highest cutting quality with accurate results that is why you do not need to worry about any finishing process that you might need to apply.

5. No need to worry about any hazardous waste
Environmentally friendly processes are being practiced nowadays that is why you need to be vigilant about this when doing your business.

Valuable Lessons I’ve Learned About Parts

What Research About Equipment Can Teach You